ZyXEL Communications MSC1024G Series User Manual page 688

Chapter 31 port Commands
Table 325 port Commands
COMMAND
port adsl alarmprof
annexl
annexm
annexi
dscarrier0
dscarrier1
inpmin
optionmask
pmm
688
<slot-port>
<alarmprofile>
disable <slot-
port>
enable <slot-port>
[narrow]
disable <slot-
port>
enable <slot-port>
disable <slot-
port>
enable <slot-port>
<slot-port> <m1>
<m2> <m3> <m4> <m5>
<m6> <m7>
<slot-port> <m1>
<m2> <m3> <m4> <m5>
<m6> <m7>
<slot-port>
<us_inp> <ds_inp>
<slot-port>
<option_mask>
disable <slot-
port>
enable <slot-port>
[L2|L3]
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Applies an ADSL alarm profile to the
subscriber port.
Turns off the Annex L reach extended
feature.
Turns on the Annex L reach extended
feature. If 'narrow' is not specified then
Annex L mode will be enabled in 'wide'
PSD mode.
Turns off the Annex M double upstream
feature.
Turns on the Annex M double upstream
feature (upstream tones from 6 to 63).
Turns off the Annex I all digital mode
feature.
Turns on the Annex I all digital mode
feature.
Disables downstream carrier tones from 33
to 255.
m1~m7 : carrier tones, 0~ffffffff,
'1' disables the corresponding tone.
Disables downstream carrier tones from
256 to 511.
: carrier tones, 0~ffffffff,
m1~m7
'1' disables the corresponding tone.
Sets the upstream and downstream
Impulse Noise Protection minimum setting
us_inp: The minimum upstream impulse
noise protection setting (0~6).
ds_inp: The minimum downstream
impulse noise protection setting (0~6).
Sets option mask attributes on a line card
port.
Turns off the power management mode.
Turns on the power management mode.
L2 : power management mode L2
L3 : power management mode L2 and L3
P
M
M
M
M
M
M
M
M
M
M
M
M
M