ZyXEL Communications MSC1024G Series User Manual page 571

Figure 392 VoIP > Interface
The following table describes the labels in this screen.
Table 302 VoIP > Interface
LABEL
Interface ID
Interface IP/
Mask
VID
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Select the number of the H.248 interface you want to configure and click Load.
Enter the H.248 interface's IP address and subnet mask. This is the IP address the
active signaling card uses to communicate with the MGC.
Enter the number of the H.248 interface's VLAN.
Chapter 18 VoIP
571