Chapter 35 sys Commands
This command displays general information about the system such as the model name and
firmware version. This is an example.
ras> sys version
[master card version info]
product model
system up time
f/w version
bootbase version: VLU1.02 | 04/01/2005
database version : 09:16:57 2006/12/14
35.3.2 sys baud set Command
Syntax:
sys baud set 9600|19200|38400|57600|115200
This command sets the console port speed in bps.
The following example sets the console port speed to 115200 bps.
ras>
sys baud set 115200
35.3.3 sys baud show Command
Syntax:
sys baud show
This command displays the console port speed. This is an example.
ras> sys baud show
current baud rate is: 115200
ras>
35.3.4 sys client set Command
Syntax:
sys client set <index> <start-ip> <end-ip> [telnet] [ftp] [web] [icmp] [ssh]
[snmp]
This command configures a secured client entry consisting of an IP address range of trusted
computers that may manage the IES and the services that they can use.
The following example creates a client set for IP addresses 192.138.1.7 to 192.168.1.35 to use
FTP to manage the system.
ras> sys client set 1 192.168.1.7 192.168.1.35 ftp
5.
Web-based management was not available at the time of writing.
912
: MSC1000G
:
1:00:13:39
: V3.70(LU.0) | 11/29/2006
5
MSC1000G/1024G/1224G Series User's Guide