Profile Voip Dsp Set Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 32 profile Commands
This command displays which subscribers use the specified DSP profile. An example is
shown, displaying the subscribers that use a DSP profile named "digsig3".
ras> profile voip dsp map digsig3
slot
---- ------------------------------------------------
123456789012345678901234567890123456789012345678
3
4 V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-----------
5
6
7
8 ------------------------
9
10

32.18.3 profile voip dsp set Command

Syntax:
profile voip dsp set <name>
[codec <codec> [,<codec>...]
[playbuffer <min-delay> <max-delay>]
[echotail <echotail>]
[echocancel off|on]
[vad off|on]
[g711vpi <g711-vpi>]
[g723vpi <g723-vpi>]
[g726vpi <g726-vpi>]
[g729vpi <g729-vpi>]
where
<codec>
<min-delay>
<max-delay>
<echo-tail>
echocancel
vad
g711-vpi
804
port
1 2 3
= Available codecs are:
G.711a: g711a
G.711µ: g711mu
G.723: g723
G.726
16-bit: g726-16
24-bit: g726-24
32-bit: g726-32
40-bit: g726-40
G.729a & b: g729ab
The play buffer minimum delay in milliseconds (10 ~ 500). This value
=
should be less than or equal to the <max-delay>.
= The play buffer maximum delay in milliseconds (10 ~ 500). This value
should be greater than or equal to the <min-delay>.
= The echo cancellation echo tail period in milliseconds (8, 16, 32 or 128).
= Enable or disable echo cancellation.
Enable or disable Voice Activity Detection (VAD).
=
Set the G.711 voice package interval, 10, 20, 30 or 40 ms.
=
4
MSC1000G/1024G/1224G Series User's Guide