ZyXEL Communications MSC1024G Series User Manual page 589

Table 306 acl Commands (continued)
COMMAND
rule
subnetvlan
usbcastctrl
MSC1000G/1024G/1224G Series User's Guide
info <vid>
<description>
optionmode <vid>
private|tr101
[vid on|off]
set <vid>
show
delete <slot-port-vpi/
vci> <profile>
set <slot-port-vpi/
vci> <profile>
show <slot-port-vpi/
vci>
disable
enable
sourceip delete <ip>/
<mask>
set <ip>/<mask>
<vid> <priority>
[<name>]
show
disable
enable
set <rate>
show
Chapter 21 acl Commands
DESCRIPTION
Sets PPPoE line information.
description: Enter a
description (up to 24 characters).
Selects the method (Private or
TR-101) in which PPPoE line
information is encoded in PPPoE
discover packets on the specified
VLAN, and whether the VLAN ID
is transmitted within the packet or
not.
The vid on|off option applies
to the TR-101 mode only.
Creates a PPPoE agent entry for
the VLAN.
Displays PPPoE line information
settings.
Removes the ACL profile.
Upstream access control rules
allows you to apply profiles on the
subscriber line PVC.
Applies the ACL profile. You can
apply up to 8 profiles to a PVC.
Displays ACL profile settings for a
PVC.
Turns off subnet-based VLAN.
Turns on subnet-based VLAN.
Removes the specified subnet-
based VLAN.
Specifies an IP address subnet
for which to configure a subnet-
based VLAN.
Displays whether subnet-based
VLAN is enabled or disabled and
list VLANs.
Disables rate limit for broadcast
traffic.
Enables rate limit for broadcast
traffic.
Sets the maximum bandwidth for
all upstream broadcast traffic
entering the MSC.
rate: 32~16384 kbps in
increments of 32 kbps.
Displays rate limit settings.
P
M
M
M
L
M
M
L
M
M
M
M
L
M
M
M
L
589