Sys Multilogin Disable Command; Sys Multilogin Show Command; Sys Reboot Command - ZyXEL Communications MSC1024G Series User Manual

The following is an example.
ras> sys multilogin enable

35.3.24 sys multilogin disable Command

Syntax:
sys multilogin disable
This command turns off multiple login. The following is an example.
ras> sys multilogin disable

35.3.25 sys multilogin show Command

Syntax:
sys multilogin show
This command displays the multiple login setting. The following is an example.
ras> sys multilogin show
multilogin is enabled
ras>

35.3.26 sys reboot Command

Syntax:
sys reboot [show|sec|cancel]
where
show
sec
cancel
This command restarts the system.
MSC1000G/1024G/1224G Series User's Guide
Displays the reboot schedule.
=
The number of seconds (1~2147483647) before the system reboots. If
=
there is no time specified, the system reboots immediately.
Aborts the scheduled system rebooting.
=
Chapter 35 sys Commands
921