Secured Client Screen - ZyXEL Communications MSC1024G Series User Manual

The following table describes the labels in this screen.
Table 266 Access Control: Service Access Control
LABEL
Services
Enable
Service Port
Apply
Cancel

16.3.1 Secured Client Screen

Click Sys > Access Control from the navigation panel and then the Secured Client tab to
open the following screen. Use this screen to configure IP address ranges of trusted computers
that may manage the system.
Figure 359 Access Control: Secured Client
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
These are services you may use to access the system are listed here.
Select the Enable check boxes for the corresponding services that you want to
allow to access the system.
For Telnet, SSH, SNMP, FTP or web services, you can use this field to change the
service port number. If you change the port number then you will have to let people
(who wish to use the service) know the new port number for that service.
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 16 Sys Screens
511