ZyXEL Communications MSC1024G Series User Manual page 163

Table 48 Alarm Descriptions (continued)
ALARM
CLUSTER_MBR_ADD
CLUSTER_MBR_DELETE
PING_PROBE_FAIL
PING_TEST_FAIL
PING_TEST_COMPLETE
TRACERT_TEST_FAIL
TRACERT_TEST_COMPL
ETE
Ethernet
ENET_UP
ENET_DOWN
ENET_LOOPGUARD
VoIP
VOP_TEMP_ERROR
VOP_DC_POWER_FAIL
VOP_AC_POWER_FAIL
VOP_RING_TIMER_FAIL
VOP_RING_RSRCE_FAIL
VOP_RING_OHD_FAIL
VOP_NO_FREE_DSP_CH
ANNEL
VOP_MC_MISSING
MSC1000G/1024G/1224G Series User's Guide
SEVERITY MSC ALC SLC VLC VOP IMA DESCRIPTION
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
MINOR X
MINOR X
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
INFO
INFO
CRITICAL
Chapter 6 Alarm Screens
The cluster manager added a
member to a cluster.
The cluster manager removed a
member from cluster.
A continuous ping test via
diagnostic tool is failed.
A ping test via diagnostic tool is
failed.
A ping test via diagnostic tool is
completed.
A trace route test via diagnostic
tool is failed.
A trace route test via diagnostic
tool is completed.
One of the MSC's Gigabit
Ethernet interfaces is up.
One of the MSC's Gigabit
Ethernet interfaces is down.
A network loop has been
detected.
X A SLAC thermal fault has been
detected on a VOP card's.
X A SLAC DC fault has been
detected on a VOP card's
telephone line.
X A SLAC AC fault has been
detected on a VOP card's
telephone line.
X A VOP card's ring timer failed.
X Too many ports are ringing, so
there was not enough ring
power to ring the phone
connected to this port.
X A ring overload indication has
been detected. A VOP card is
close to using its full ring power
and will reduce the ring output
power if the load continues to
increase.
X A VOP card's DSP channels
were all in use so the VOP was
not able to handle another call.
This could be caused by the
VOP card's DSP processing
many conference calls.
X The signaling VOP card cannot
detect the media VOP card.
163