21.10.2 acl ouifilter enable Command
Syntax:
acl ouifilter enable <slot-port>
This command activates MAC OUI filtering on the port(s) of the specified line card.
21.10.3 acl ouifilter mode Command
Syntax:
acl ouifilter mode <slot-port> accept|deny
where
accept|deny
This command activates MAC OUI filtering on the port(s) of the specified line card. Use the
acl ouifilter set
The following example sets the system to drop packets with the specified OUI value on port 1
of the line card in slot 3.
ras> acl ouifilter mode 3-1 deny
21.10.4 acl ouifilter set Command
Syntax:
acl ouifilter set <slot-port> <mac>
where
<mac>
This command specifies a MAC OUI whose packets you want to filter. Use the
ouifilter mode
The following example sets the system to filter packets with an OUI value of 00-0F-FE on port
1 of the line card in slot 3.
ras> acl ouifilter set 3-1 00:0f:fe
21.10.5 acl ouifilter show Command
Syntax:
acl ouifilter show <slot>|<slot-port>
MSC1000G/1024G/1224G Series User's Guide
=
accept:
Allows frames from MAC addresses with the OUI(s) that you
specify and blocks frames with MAC addresses of other OUIs.
deny:
Blocks frames from MAC addresses with the OUI(s) that you
specify and allows frames from other MAC addresses.
command to set the OUI value(s).
The first three octets of a MAC address in the format xx:xx:xx. For example,
=
00:0F:FE.
command to set the action on the matched packets.
Chapter 21 acl Commands
acl
605