ZyXEL Communications MSC1024G Series User Manual page 167

Figure 85 Alarm > Alarm Input
The following table describes the labels in this screen.
Table 50 Alarm > Alarm Input
LABEL
Index
Input
Apply
Cancel
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This is the index number for the external alarm input.
Enter 1 to 31 characters for the name of the connected external alarm system.
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config
Save on the navigation panel and then the Save button to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to begin configuring the screen again.
Chapter 6 Alarm Screens
167