Chapter 21 acl Commands
This command displays PPPoE line information settings. The following figure shows the
PPPoE agent setting for VLAN 10.
ras> acl pppoeagent show
vid
en
---- ----- ------------------------
10
V
vlan set: 1
ras>
21.13 acl rule Commands
Use the
acl rule
commands) on the PVCs.
21.13.1 acl rule delete Command
Syntax:
acl rule delete <slot-port-vpi/vci> <profile>
where
<profile>
This command allows you to remove an access control setting from the specified PVC.
21.13.2 acl rule nomatch Command
Syntax:
acl rule nomatch <slot-port> accept|deny
This command allows you to select whether to forward (accept) or drop (deny) traffic that does
not match any of the rules in the ACL profile. This only applies to the VLC13XXG and the
ELC.
The following example drops traffic on slot 6 port 3 that does not match any of the rules in the
ACL profile.
ras> acl rule nomatch 6-3 deny
21.13.3 acl rule set Command
Syntax:
acl rule set <slot-port-vpi/vci> <profile>
where
<profile>
610
info
testing
commands to apply ACL profiles (you created using the
=
Name of an access control profile.
Name of an access control profile.
=
MSC1000G/1024G/1224G Series User's Guide
profile acl