ZyXEL Communications MSC1024G Series User Manual page 586

Chapter 21 acl Commands
Table 306 acl Commands (continued)
COMMAND
dsbcast
dscp
loopguard
586
secret <index>
<secret_key>
show
enable <slot-port>
<vid>
disable <slot-port>
<vid>
show <slot>|<slot-
port>
disable <slot-port>
enable <slot-port>
set <codepoint>
<priority>
show [slot]
disable <giga-
port>|<slot-
port>
DESCRIPTION
Sets the authentication and
encryption key of the specified
RADIUS server.
index: The RADIUS server
number.
secret_key: The authentication
encryption key (<=31 characters).
Displays the external RADIUS
server settings.
Turns on the blocking of
downstream broadcast packets
from going to the specified VLAN
on the specified port.
Turns off the blocking of
downstream broadcast packets to
go to the specified VLAN on the
specified port.
Displays the settings for blocking
downstream broadcast packets
for the specified slot or port.
Stops the DSCP (Differentiated
Services Code Point) service on
the specified slot and port.
DSCP is a field in the header of IP
packets for packet classification
purposes. QoS (Quality-of-
Service) uses DSCP to provide
different level of services and
priorities. See
page 599 for more information.
Enables DSCP service on the
specified slot and port.
Sets DSCP settings.
codepoint: Each number of
codepoints represents a level of
service (0~63).
priority: 0~7 (0 is the lowest
priority level and 7 is the highest)
Displays global DSCP settings or
for the specified slot.
slot: is between slot 1 and 5
except the MSC slot.
Disables loop guard on the
specified port(s).
MSC1000G/1024G/1224G Series User's Guide
P
M
L
M
M
M
M
Section 21.7 on
M
M
L
M