Chapter 4 Wireless Station Mode Configuration
Figure 31 Station Mode: Profile: Add a New Profile
The following table describes the labels in this screen.
Table 12 Station Mode: Profile: Add a New Profile
LABEL
Add New Profile
Profile Name
SSID
Network Type
Next
Exit
Scan Info
,
,
or
SSID
Scan
Select
52
DESCRIPTION
Enter a descriptive name in this field.
Select an available wireless device in the Scan Info table and click Select, or
enter the SSID of the wireless device to which you want to associate in this field
manually.
Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
This field displays the SSID (Service Set IDentifier) of each AP or peer device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the G-320H associates to the selected wireless
network only.
G-320H User's Guide