ZyXEL Communications MSC1024G Series User Manual page 457

Figure 313 IMA Statistics: IMA Line Card: Group Detail: Link Detail
The following table describes the labels in this screen.
Table 225 IMA Statistics: IMA Line Card: Group Detail: Link Detail
LABEL
RelDelay(ms)
Violations
OifAnomalies
NeSevErroredSec
s(secs)
FeSevErroredSec
s(secs)
NeUnavailSecs(se
cs)
FeUnavailSecs(se
cs)
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This field displays the least delay in milliseconds measured most recently on this
link compared to the other links in the same IMA group.
This field displays the total number of ICP Violations on this link including the
number of errored, invalid or missing ICP cells, except during an SES (Severely
Errored Seconds) or a UAS (UnAvailable Seconds) condition.
The field displays the number of Out of IMA Frame (OIF) anomalies, except
during SES-IMA or UAS-IMA conditions, at the near-end.
The field displays the number of seconds containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or
LCD), LIF defects, or LODS defects, except during UAS-IMA condition.
The field displays the number of seconds containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition.
The field displays the number of unavailable seconds detected at the near-end
(on the IMA line card).
The field displays the number of unavailable seconds detected at the far-end (on
the remote IMA device).
Chapter 14 Statistics Screens
457