Sys Commands; Sys Version Command - ZyXEL Communications MSC1024G Series User Manual

Table 348 sys Commands (continued)
COMMAND
sync
user auth
delete
disable
enable
online
server
set
show
version

35.3 sys Commands

Use these commands for system management and maintenance.

35.3.1 sys version Command

Syntax:
sys version
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Gets the time and date from a predefined
time server.
Selects which database the switch uses to
<mode>
authenticate a user.
local then radius, 4: TACACS+, 5: local
then TACACS+, 6: radius then local, 7:
tacas+ then local
Removes a user account.
<name>
Stops a user from logging in.
<name>
Allows a user to log in.
<name>
Displays information about online users
that are logged into the switch. * denotes
your session.
Sets a RADIUS server's IP address and
<ip-address>
port number and the password to access
<port> <secret>
the server.
[high|middle|low|d
low
eny]
privilege level if the received service type
is "login".
medium
medium privilege level if the received
service type is "nas-prompt".
high
privilege level if the received service type
is "admin".
deny
account if no service type is received.
Sets a user account and its level of
<username>
access privileges.
<password>
high|middle|low
Displays authentication settings and user
accounts.
Displays the system's general information
such as the model name and firmware
version.
Chapter 35 sys Commands
1 : local, 2 : radius,
: assigns the login accounts a low
: assigns the login accounts a
: assign the login accounts a high
: block access from this login
P
M
H
3 :
H
H
H
L
H
H
L
L
911