ZyXEL Communications MSC1024G Series User Manual page 699

Table 325 port Commands (continued)
COMMAND
vdsl2 alarmprof
frametype
priority
pvid
pvlan
ratelimit
set
tls
vlan
xvlan
MSC1000G/1024G/1224G Series User's Guide
set <slot-port>
<cvid> <svid>
<cvid-s>
show <slot-port>
<slot-port>
<profile>
<slot-port>
<all|tag>
<slot-port>
<priority>
<slot-port> <vid>
delete <slot-port>
<etype>
set <slot-port>
<etype> <vid>
<priority>
<slot-port> <rate-
limit_profile>
<slot-port>
<template>
disable <slot-
port>
enable <slot-port>
set <slot-port>
<svid> <spriority>
<slot-port> <vid>
<registration>
<tag>
delete <slot-port>
<cvid>
set <slot-port>
<cvid> <svid>
show <slot-port>
Chapter 31 port Commands
DESCRIPTION
Creates an xVLAN entry for the specified
port. cvid is the original customer VLAN
ID. When the port receives traffic from the
subscriber with a cvid VLAN tag, xVLAN
changes it to the svid before forwarding it
to the service provider's network. The
VLC13XXG's xVLAN can also include a
translated customer VLAN ID (cvid-s).
Displays the xVLAN settings for the
specified port.
Sets the VDSL2 alarm profile that the
specified port uses.
Sets the acceptable frame type on the
port(s).
Sets the port(s)' VLAN priority (0~7). 0 is
the lowest priority level and 7 is the
highest.
Sets the port VID on the port(s).
Deletes a protocol VLAN setting on a
specified port.
Sets the protocol VLAN settings on a
specified port.
Sets the specified port(s) to use a profile of
egress and ingress rate settings.
Sets the specified port(s) to use a VDSL2
template profile.
Disables Transparent LAN Service (TLS).
The system does not insert additional
VLAN tags to packets.
Turns on Transparent LAN Service (TLS)
to insert additional VLAN tags to packets.
Sets/changes TLS settings on the VDSL
port(s).
svid: The service provider VLAN ID.
spriority: The service provider IEEE
802.1p priority setting.
Sets the VLAN setting on the VDSL port(s).
Removes the specified xVLAN entry (cvid)
from the specified port.
Creates an xVLAN entry for the specified
port. cvid is the original customer VLAN
ID. When the port receives traffic from the
subscriber with a cvid VLAN tag, xVLAN
changes it to the svid before forwarding it
to the service provider's network.
Displays the xVLAN settings for the
specified port.
P
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
699