C
H A P T E R
This chapter shows you how to use the
31.1 General port Command Parameters
The following table describes commonly used
Table 324 General port Command Parameters
NOTATION
alarmprofile
registration
tag
slot-port-vpi/
vci
option_mask
slot-port
31.2
Commands Summary
port
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
MSC1000G/1024G/1224G Series User's Guide
port Commands
commands.
port
port
DESCRIPTION
The name of an alarm profile configured using the profile alarm commands.
Specify whether a port joins
(join
The VLAN tag. Options are
tag
The card inserted in a slot, a port on that line card, and the VPI/VCI settings for the
DSL line connected to that port, for example,: 3-1-0/33.
This is used to configure DSL connection settings.
Option bit map, 0x0000~0x0400.
: disables Trellis coding in ADSL mode
0x0001
0x0002
: disables Reed-Solomon coding for ADSL
0x0004
: disables upstream 1-bit constellation support
: disable downstream bitswap
0x0008
0x0010
: disable 1-bit constellation
0x0020
: disables the transmit windowing in ADSL2+ mode
: disables S=0.5 support in G.dmt.
0x0040
0x0080
: disable G.lite rate limit (G.lite only)
0x0200: enables ADSL2 Annex L.
0x0400: enables ADSL2+ Annex M.
A line card inserted in a slot and a port on that card. For example, 2-1.
commands. The P column on the right indicates the
port
31
command parameter notation.
) or leaves (
leave)
a VLAN.
or
untag.
687