Chapter 31 port Commands
31.34.7 port vdsl optionmask Command
Syntax:
port vdsl optionmask <slot-port> <option-mask>
where
<option-mask>
This command sets the PSD mask for the option bit on the specified port.
The following example enables Trellis coding on traffic on port 5 on the VDSL card in slot 4.
ras> port vdsl optionmask 4-5 0x0001
31.34.8 port vdsl limitmask set Command
Syntax:
port vdsl limitmask set <slot-port> <limitmask>
where
<limitmask>
This command sets the PSD mask for the option bit on the specified port.
The following example sets the PSD mask to "VDSL2_A_NUS0" on traffic on port 5 on the
VDSL card in slot 4.
ras> port vdsl limitmask set 4-5 1
746
The PSD mask value for the option bit.
=
The PSD (Power Spectrum Density) mask.
=
limitmask:
1: VDSL2_A_NUS0
2~11: VDSL2_A_EU[32,36,40,44,48,52,56,60,64,128]
12: VDSL1_FTTEX_ANSI_M1
13: VDSL1_FTTEX_ANSI_M2
14: VDSL1_FTTCAB_ANSI_M1
15: VDSL1_FTTCAB_ANSI_M2
16: VDSL1_FTTEX_ANSI_M1_e
17: VDSL1_FTTEX_ANSI_M2_e
18: VDSL1_FTTCAB_ANSI_M1_e
19: VDSL1_FTTCAB_ANSI_M2_e
20: VDSL2_A_CT
21~36: VDSL2_B8_[1..16]
37~46: VDSL2_B7_[1..10]
47: VDSL2_BT_ANFP
48: VDSL2_C_138_b
49: VDSL2_C_276_b
50: VDSL2_C_138_co
51: VDSL2_C_276_co
Four additional customer-defined PSD shapes can be configured per
system.
MSC1000G/1024G/1224G Series User's Guide