Chapter 24 cluster Commands
24.2.1 cluster disable Command
Syntax:
cluster disable
This command sets this DSLAM to not function as part of the cluster.
24.2.2 cluster enable manager Command
Syntax:
cluster enable manager <name>
where
<name>
This command sets this DSLAM as the cluster manager DSLAM. A cluster can only have one
manager. Other cluster managers do not display in the cluster candidate list.
The following example sets the DSLAM to be the cluster manager and use "Manager-A" as
the cluster name.
ras> cluster enable manager Manager-A
24.2.3 cluster enable member Command
Syntax:
cluster enable member <password>
where
<password>
This command sets this DSLAM to be a cluster member. The device will display in the cluster
candidate list.
The following example sets the DSLAM to be a cluster member. The DSLAM's management
password is "1234".
ras> cluster enable member 1234
24.2.4 cluster login Command
Syntax:
cluster login <id>
where
624
=
A name to identify the cluster. You may use up to 32 printable characters.
Spaces are not allowed.
=
Type the cluster member's management password. If the administrator
changes the device's management password afterwards, then it cannot
be managed from the cluster manager.
=
The member's ID number (2~8).
<id>
MSC1000G/1024G/1224G Series User's Guide