Chapter 22 alarm Commands
Table 308 alarm Commands (continued)
COMMAND
edit
xedit
history
input
port
show
tablelist
614
<alarm>|all
<fac>
<target>[,<targ
et>]
<alarm> <cond>
<severity>
<fac>
<target>[,<targ
et>]
<clearable>
clear
<alarm>|all
<condition>|all
clear
<severity>
show
[<severity>|all]
[<alarm>|all]
[<condition>|all
] [<sdate>|all]
[<edate>|all]
[for|rev]
[detail]
name
<index> <name>
show
show
<slot>
set
all|mgmt|<giga-
port>|<slot-
port> <severity>
[<severity>|all]
[<alarm>|all]
[<condition>|all
] [<sdate>|all]
[<edate>|all]
[for|rev]
[detail]
[<alarm>|all]
[<severity>|all]
[<fac>|all]
[<target>[,<targ
et>]]
[<condition>|all
]
DESCRIPTION
Edits an alarm report entry.
Sets the severity level of an alarm(s)
and where the system is to send the
alarm(s).
clearable: Options are clearable
or unclearable.
Removes historic alarm entries by
alarm category and alarm condition or
by severity.
Displays historic alarms by severity,
alarm category and alarm condition.
You can also display detailed alarms.
Sets the names for external alarms.
index: 1~4. This is the index number
for the external alarm input.
name: Enter 1 to 31 characters for the
name of the connected external alarm
system.
Displays the external alarm names.
Displays port alarm severity level
thresholds.
Sets the severity of alarms to record for
individual ports.
mgmt: This is the management port.
Displays current alarms by severity,
alarm category or alarm condition. You
can also display detailed alarms.
Displays the supported alarm list and
report settings.
MSC1000G/1024G/1224G Series User's Guide
P
M
M
M
L
M
L
L
M
L
L