ZyXEL Communications MSC1024G Series User Manual page 321

Figure 206 MGTPVC Setup
The following table describes the fields in this screen.
Table 138 MGTPVC Setup
LABEL
MGTPVC Table
Slot
Group
Load
Index
VPI / VCI
Profile
PVID / Priority
MUX
Ip
Gateway
Select
Modify
Delete
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This table displays the management PVC settings that are configured for the
selected IMA group.
Select the number of an IMA line card's slot. The corresponding group setup
screen for the type of line card you selected automatically displays.
Select the number of an IMA group on the line card.
Click Load to display the port's PVC settings in the MGTPVC Table.
This is the number of the PVC on this group.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI), if any. The VPI and VCI identify a channel on this group.
This field displays the ATM profile that this channel uses.
This field displays the service provider's VLAN ID and priority settings that this
channel uses.
• The PVID here is the service provider's VLAN ID (the outer VLAN tag) that the
line card assigns to untagged frames received on this PVC.
• Priority is the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this PVC. "0" is the lowest
priority level and "7" is the highest.
This field displays the encapsulation type (llc or vc) for this channel.
This field displays the IP address the remote IMA device uses to connect with the
IMA line card for management traffic transmission.
This field displays the IP address a management computer uses to connect with
the IES and manage management traffic.
Select an MGTPVC's radio button and then use the Modify, Copy or Delete
button.
Select a profile's Select radio button and click Modify to edit the PVC settings.
Select a profile's Select radio button and click Delete to remove the PVC settings.
Chapter 12 IMA Screens
321