Cluster Member Firmware And Configuration File Management - ZyXEL Communications MSC1024G Series User Manual

Chapter 24 cluster Commands
This command sets the VLAN ID for the cluster.
The following example sets the cluster VID to 79.
ras> cluster vlan 79
24.3 Cluster Member Firmware and Configuration File
Management
You can use FTP to upload firmware to a cluster member through the cluster manager. You can
also upload or download configuration files. The following example shows uploading MSC
firmware to cluster member 2. See
and uploading or downloading configuration files.
Figure 394 FTP Upload to a Cluster Member Example
C:\>ftp 123.23.19.228
Connected to 123.23.19.228.
220 FTP version 1.0 ready at Fri Nov 10 10:53:52 2006
User (123.23.19.228:(none)): admin
331 Enter PASS command
Password:
230 Logged in
226 File sent OK
ftp> bin
200 Type I OK
ftp> cd member-2
257 "/node-2" is current directory
ftp> put 370AIN0b5.bin
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 3558910 bytes sent in 3.89Seconds 914.65Kbytes/sec.
ftp>
The following table explains some of the FTP parameters.
Table 312 FTP Upload to a Cluster Member Example
FTP PARAMETER
User
Password
bin
V3.70(ABF.0)b5
cd member-2
628
Chapter 38 on page 961
DESCRIPTION
Enter "admin".
The web configurator password default is 1234.
Changes the transfer mode to binary.
This is the name of the firmware file you want to upload to the
cluster member.
Use "cd member-" and the index number of the cluster member to
which you want to upload firmware. This index number matches the
member's number in the
MSC1000G/1024G/1224G Series User's Guide
for more on uploading firmware