Profile Alarmshdsl Set Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 32 profile Commands
The following example displays the default alarm SHDSL profile (DEFVAL).
ras> profile alarmshdsl show DEFVAL
shdsl alarm profile : DEFVAL
loop attenuation(atten)
snr margin(snrmgn)
es
ses
crc anomalies(crc)
losws
uas
ras>

32.8.2 profile alarmshdsl set Command

Syntax:
<profile> [atten <atten>] [snrmgn <snrmgn>] [es <es>] [ses <ses>][crc <crc>]
[losws <
where
This command configures SHDSL port alarm thresholds. The system sends an alarm trap and
generates a syslog entry when the thresholds of the alarm profile are exceeded.
Configure
to use them with specific SHDSL ports.
The following example sets an alarm profile named SESalarm that has the system send an
alarm trap and generate a syslog whenever the connection's number of severely errored
seconds exceeds three within a 15 minute period.
ras> profile alarmshdsl set SESalarm ses 3
780
(dB):
(dB):
(sec):
(sec):
(sec):
(sec):
losws uas
>] [uas < >]
=
<profile>
=
<atten>
<snrmgn> =
=
<ess>
=
<ses>
<crc>
<losws>
=
<uas>
profiles first and then use the
alarmshdsl
0
0
0
0
: 0
0
0
A name for the alarm profile (up to 31 English keyboard
characters).
The permitted loop attenuation of a port, 0~127
The permitted signal to noise ratio margin, 0~15.
The number of Errored SecondS (0~900) that are permitted to
occur within 15 minutes.
The number of Severely Errored Seconds (0~900) that are
permitted to occur within 15 minutes.
The number of Cyclic Redundancy Checking anomalies that
are permitted to occur within 15 minutes.
The number of Loss Of Sync Word Seconds (0~900) that are
permitted to occur within 15 minutes.
The number of UnAvailable Seconds (0~900) that are
permitted to occur within 15 minutes.
port shdsl alarmprof
MSC1000G/1024G/1224G Series User's Guide
command to