Sys Monitor Show Command - ZyXEL Communications MSC1024G Series User Manual

<high-limit>
<low-limit>
This commands sets the hardware monitor high and low thresholds.
The following example sets fan 1's maximum RPM threshold to 7500 and minimum RPM
threshold to 5000. The MSC is in slot 2.
ras> sys monitor set 2 fan 1 7500 5000

35.3.22 sys monitor show command

Syntax:
sys monitor show <slot>
where
This command displays the hardware monitor's statistics.
MSC1000G/1024G/1224G Series User's Guide
= A sensor's maximum voltage, temperature, fan RPM, or utilization limit.
The maximum voltage for each voltage sensor must be within the following
ranges. Measured in millivolts (mV).
MSC: 1 = 2575~2750, 2 = 1287~1375, 3 = 3399~3630, 4 = 1339~1430, 5
= 15450~16500
ADSL line card: 1 = 1236~1320, 2 = 1854~1980, 3 = 3399~3630, 4 =
21115~22550
SHDSL line card 1 = 1854~1980, 2 = 3399~3630, 3 = 15450~16500
VDSL line card 1 = 3399~3630, 2 = 12360~13200, 3 = 1236~1320, 4 =
1236~1320, 5 = 1854~1980
VoIP line card 1 = 1339~1430, 2 = 2575~2750, 3 = 3399~3630, 4 =
3399~3630, 5 = 5150~5500
Ethernet line card 1 = 2575~2750, 2 = 1287~1375, 3 = 3399~3630, 4 =
5150~5500
The maximum temperature for each temperature sensor must be within
50~100 (degrees Celsius).
The maximum RPM for each fan must be within 1000~8000.
A sensor's minimum voltage, temperature, fan RPM, or utilization limit.
=
The minimum voltage for each voltage sensor must be within the following
ranges. Measured in millivolts (mV).
MSC:1= 2250~2425, 2 = 1125~1212, 3 = 2970~3201, 4 = 1170~1261, 5 =
13500~14550.
ADSL line card: 1= 1080~1164, 2 = 1620~1746, 3 = 2970~3201, 4 =
18450~19885
SHDSL line card: 1 = 1620~1746, 2 = 2970~3201, 3 = 13500~14550
VDSL line card 1 = 2970~3201, 2 = 10800~11640, 3 = 1080~1164, 4 =
1080~1164, 5 = 1620~1746
VoIP line card 1 = 1170~1261, 2 = 2750~2425 3 = 2970~3201, 4 =
2970~3201, 5 = 4500~4850
Ethernet line card 1 = 2250~2425, 2 = 1080~1164, 3 = 970~3201, 4 =
4500~4850
The minimum temperature for each temperature sensor must be within -
50~10 (degrees Celsius).
The minimum RPM for each fan must be within 1000~8000.
= The main chassis slot where the card is located. The fan statistics
<slot>
are included with the MSC statistics.
Chapter 35 sys Commands
919