The Local Help Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Chapter 18 VoIP

Table 297 The VoIP > H248 Screen

Operational Mode

802.1P 802.1p

18.10 The Local Help Screen

The local help feature allows subscribers on the VoIP line card(s) to place calls to other,

specified extensions when the system's connection to the regular service provider is not

You can use this feature to provide an alternative to emergency calls. For example, if users

cannot call 911 (in order to reach an emergency dispatcher at a public safety answering point)

you can route 911 calls to a company medical office or security guardhouse. When a user dials

the number, the first number in the corresponding table rings. If the call is not answered, the

second number in the table rings, and so on.

To use this feature, you must also configure the Profile > VoIP SIP CALLSVC

Click VoIP > Local Help. The following screen displays.

Click Apply to save the changes in this screen to the system's volatile memory.

The system loses these changes if it is turned off or loses power, so use the

Config Save on the navigation panel and then the Save button to save your

changes to the non-volatile memory when you are done configuring.

While you are modifying a profile, you can click New to start configuring a fresh

profile without saving your changes.

Click Cancel to start configuring the screen again.

This is the slot number of a VoIP card with configured settings.

This shows whether the VoIP card is set as a media card or a signaling card.

This is the IP address this VoIP uses for communicating with the media gateway

controller (softswitch).

This is the IP address this VoIP uses for communicating with the media cards.

This is the IEEE 802.1p priority (0~7) for this VoIP card's traffic.

This is the DSCP service level for this VoIP card's traffic.

Select an entry and click Modify in order to edit its configuration.

MSC1000G/1024G/1224G Series User's Guide

Msc1224g series Msc1000g series