Sys User Set Command; Sys User Delete Command; Sys User Enable Command - ZyXEL Communications MSC1024G Series User Manual

The following example sets a RADIUS server IP address of 192.168.1.77, port number of
1813 and password of "pwd1234". The account is assigned a
type information is received from the RADIUS server.
ras> sys user server 192.168.1.77 1813 pwd1234 medium

35.6.3 sys user set Command

Syntax:
sys user set <username> <password> high|middle|low
where
<username>
<password>
high|middle|low
This command sets a local user administrator account and its level of access privileges.
The following example sets an administrator account with a user name of "bob" password of
"smith" and middle level access privileges.
ras> sys user set bob smith middle

35.6.4 sys user delete Command

Syntax:
sys user delete <name>
where
This command removes a local user administrator account.
The following example removes the "fred" administrator account.
ras> sys user delete fred

35.6.5 sys user enable Command

Syntax:
sys user enable <name>
MSC1000G/1024G/1224G Series User's Guide
= The user name for the account
The password for the account.
=
The user account's level of access privileges.
=
high : Can use all commands.
middle : Can use middle or low privilege commands. Middle privilege
commands include things like general feature configuration.
low : Can only use low privilege commands. Low privilege commands
are read only and consist of displaying feature settings or configuration.
= The user name for the account.
<name>
Chapter 35 sys Commands
privilege if no service
medium
929