Chapter 34 switch Commands
The following example sets the switch to be a member of the
ras> switch mstp cfgname test
34.10.2 switch mstp disable Command
Syntax:
switch mstp disable
This command deactivates the MSTP feature on the switch.
34.10.3 switch mstp enable Command
Syntax:
switch mstp enable
This command activates the MSTP feature on the system.
34.10.4 switch mstp fwdelay Command
Syntax:
switch mstp fwdelay <fwdelay-sec>
This command sets the forward delay period (between 4 and 30 seconds) the switch waits
before changing states.
The following example sets the forward delay time to 15 seconds.
ras> switch mstp fwdelay 15
34.10.5 switch mstp hellotime Command
Syntax:
switch mstp hellotime <hellotime-sec>
This command sets the time interval (between 1 and 10 seconds) between BPDU (Bridge
Protocol Data Units) configuration message generations by the root switch.
The following example sets the hello time to 5 seconds.
ras> switch mstp hellotime 5
34.10.6 switch mstp maxage Command
Syntax:
switch mstp maxage <maxage-sec>
This command sets the maximum time (between 6 and 40 seconds) a switch can wait without
receiving a BPDU before attempting to reconfigure.
890
MST region.
test
MSC1000G/1024G/1224G Series User's Guide