ZyXEL Communications MSC1024G Series User Manual page 270

Chapter 11 Subscriber Port Setup Screens
Figure 166 IPBPVC
The following table describes the labels in this screen.
Table 111 IPBPVC
LABEL
Slot
Port
Load
Index
VPI/VCI
Profile
Type
IPBPVC
PVID
Priority
270
DESCRIPTION
Use this drop-down list box to select the slot that contains a line card with a port
for which you wish to set up an IP bridge PVC.
Use this drop-down list box to select a port for which you wish to set up an IP
bridge PVC.
Click Load to display the port's IPB PVC settings in the fields below.
This field displays the index number of a channel on this port. Click the index
number to go to a screen where you can configure the IPB PVC's VLAN settings
(see Section 11.19.1 on page
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
This shows which ATM profile this channel uses.
This field displays IPB to indicate that this is an IPB PVC.
llc and vc are for a PVC running on Ethernet (IPoE), llc_r and vc_r are for a
PVC running on ATM (IPoA).
This is the VLAN ID assigned to frames received on this channel.
This is the priority value (0 to 7) added to incoming frames without a (IEEE
802.1p) priority tag.
272).
MSC1000G/1024G/1224G Series User's Guide