ZyXEL Communications MSC1024G Series User Manual page 985

Table 355 MSC Specifications
MSC1224G Ethernet
Network Interfaces
Power Specification
Switching
Standards Compliance
Operating Environment
MSC1000G/1024G/1224G Series User's Guide
2 x 10G Ethernet uplink ports
• 2 optical fiber port (XFP module) for uplink traffic aggregation. Port 1 & 2,
which provides INF-8077i compatible connection for XFP transceiver
module (10 Gigabit Ethernet). These ports will operate in fix mode
6 Gigabit Ethernet uplink & subtending ports
• 2 optical fiber port (SFP modules) for uplink traffic aggregation: Port 3 &
4, which provide INF-8074i compatible connection for Small Form-factor
Pluggable (SFP) transceiver module These ports will operate in auto
mode or fix mode
• 2 1000Mbps interface modules (combo design, SFP + copper, port 5 & 6)
for dynamic adjustment about subtending and uplink aggregation,
depending on the practical deployment requirement
• 2 1000Mbps interface modules (copper, port 7 & 8) for dynamic
adjustment about subtending and uplink aggregation, depending on the
practical deployment requirement
CoS for uplink and subtending ports
MSC1000G, MSC1024G
Power Rating: 1A MAX
Power Consumption: 20 W
MSC1224G
-48 VDC (-40.5 VDC to -56 VDC)
33 W, 1.6 A (max)
Switching fabric capability: 24Gbps, non-blocking full duplex
Forwards IEEE 802.3, IEEE 802.1Q, Ethernet II frames
Prevents the forwarding of corrupted packets
Operates at L2 switch mode
Supports 16K MAC entries
Supports 4K VLAN entries
IEEE 802.1p, 802.1Q
IEEE 802.3u/3z/3x/3ab
SFF committee INF-8074i Specification SFP (Small Form factor Pluggable)
transceiver rev.1.0
MSC1000G
-40 ~ 65 degrees C
10% ~ 90% RH (non-condensing)
MSC1024G, MSC1224G
0 ~ 50 degrees C
10% ~ 90% RH (non-condensing)
Chapter 40 Product Specifications
985