Show Rmon Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 33 show Commands
The following example displays the one day performance counters for ADSL port 5 on the line
card in slot 7.
ras> show performance 7-5 1day
PerfCurr1Day
-------------
vtuc/vtur TimeElapsed
vtuc/vtur Lofs
vtuc/vtur Loss
vtuc
vtuc
vtur
vtur
vtuc/vtur ESs
vtuc
vtuc/vtur SesL
vtuc/vtur UasL
ChanPerfCurr1Day
-----------------
vtuc/vtur TimeElapsed
Press any key to continue, 'e' to exit
PerfPrev1Day
------------
vtuc/vtur MoniSecs
vtuc/vtur Lofs
vtuc/vtur Loss
vtuc
atuc
vtur
vtur
vtuc/vtur ESs
atuc
vtuc/vtur SesL
vtuc/vtur UasL
ChanPerfPrev1Day
----------------
vtuc/vtur MoniSecs
ras>
This table describes the fields that have not already been addressed.
Table 343 show performance 1day
LABEL
TimeElapsed
MoniSecs

33.3.28 show rmon Command

Syntax:
show rmon stats|history <giga-port>
856
= 57163/57163 seconds
= 0/0 seconds
= 0/0 seconds
Lols = 0 seconds
Lol = 0
Lprs = 0 seconds
Lpr = 0
= 0/0 seconds
Inits = 1
= 0/0 seconds
= 0/0 seconds
= 57163/57163 seconds
= 0/0 seconds
= 0/0 seconds
= 0/0 seconds
Lols = 0 seconds
Lol = 0
Lprs = 0 seconds
Lpr = 0
= 0/0 seconds
Inits = 0
= 0/0 seconds
= 0/0 seconds
= 0/0 seconds
DESCRIPTION
This is the number of seconds that the DSL line card has been active.
This is the number of seconds that the DSL line card was active during the
measured period.
MSC1000G/1024G/1224G Series User's Guide