ZyXEL Communications MSC1024G Series User Manual page 698

Chapter 31 port Commands
Table 325 port Commands (continued)
COMMAND
priority
pvid
pvlan
rfiband
rficustom
tls
upbo
vlan
xvlan
698
<slot-port>
<priority>
<slot-port> <vid>
delete <slot-port>
<etype>
set <slot-port>
<etype> <vid>
<priority>
<slot-port>
<disable|ansi|etsi
|custom>
disable <index>
enable <index>
set <index>
<start_freq>
<stop_freq>
show
disable <slot-
port>
enable <slot-port>
set <slot-port>
<svid> <spriority>
enable
disable
param <slot-port>
<a0> <b0> <a1> <b1>
[<a2> <b2>
forceelength <slot-
port> <value>
<slot-port> <vid>
<registration>
<tag>
delete <slot-port>
<cvid>
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Sets the VDSL port(s) VLAN priority (0~7).
0 is the lowest priority level and 7 is the
highest.
Sets the port VID on the VDSL port(s).
Deletes a protocol VLAN setting on a
specified port.
Sets the protocol VLAN settings on a
specified port.
Selects an RFI band or disables this
feature.
Displays the settings of a custom RFI
entry.
Activates the specified custom RFI entry.
Sets a custom RFI entry.
index: 1~8
: The start of the frequency
start_freq
range in kHz. start_freq
bigger than .
stop_freq
: end of the frequency range
stop_freq
in kHz.
Displays custom RFI settings.
Disables Transparent LAN Service (TLS).
The system does not insert additional
VLAN tags to packets.
Turns on Transparent LAN Service (TLS)
to insert additional VLAN tags to packets.
Sets/changes TLS settings on the VDSL
port(s).
svid: The service provider VLAN ID.
spriority: The service provider IEEE
802.1p priority setting.
Enables the Upstream Power Back Off
(UPBO) feature.
Disables the Upstream Power Back Off
(UPBO) feature.
ai: UPBO Ai parameter for USi (-20725~-
10240 in 1/256 dBm/Hz).
bi: UPBO Bi parameter for USi (-10485~0
in 1/256 dBm/Hz).
value: Range (0~1270 in 0.1 dB). A
negative value means no electric length
will be performed.
Sets the VLAN setting on the VDSL port(s).
Removes the specified xVLAN entry (cvid)
from the specified port.
P
M
M
M
M
M
M
M
M
cannot be
L
M
M
M
M
M
M
M
M
M