Access Point Mode Configuration; Access Point Mode Introduction; Zyxel Utility Screen Summary; Additional Setup Requirements - ZyXEL Communications ZyXEL ZyAIR G320H User Manual

C
H A P T E R
This chapter shows you how to configure your G-320H in access point mode.

5.1 Access Point Mode Introduction

To use your G-320H as an Access Point (AP), select AP Mode in any utility screen (refer to
Section 1.2.3 on page
In access point mode, your G-320H allows you to set up your wireless networks without using
a dedicated AP.

5.1.1 ZyXEL Utility Screen Summary

This section describes the ZyXEL utility screens when the G-320H is in AP mode.

Figure 38 ZyXEL Utility Menu Summary: AP Mode

The following table describes the menus.

Table 15 ZyXEL Utility Menu Summary: AP Mode

TAB
AP Mode
Link Info
Configuration
MAC Filter

5.1.2 Additional Setup Requirements

To bridge your wired and wireless network using the G-320H, the following requirements
must be met:
G-320H User's Guide
Access Point Mode
21).
DESCRIPTION
Use this screen to see your current connection status, configuration and data rate
statistics.
Use this screen to configure wireless LAN settings.
Use this screen to configure which computer(s) you want to access the wireless
LAN through the G-320H.
Configuration
5
59