Setting the Length of Overcut
Set the length of overcut with tangential mode.
Operation
1
Press the [COND/TEST] key.
CONDITION screen (1/4) is displayed.
2
Press the POSITION ( ) key.
CONDITION screen (2/4) is displayed
3
Press the [4] key (OVERCUT).
OVERCUT setting screen is displayed.
4
Press the [1] key (Condition No. 1)
CONDITION No. selection screen is displayed.
5
Press the POSITION (
No.
6
Confirm the setting, and press the [ESC] key (PREVIOUS).
Condition No. will be selected, and it will return to OVERCUT setting
screen.
) keys and select the CONDITION
7-4