Snmp Test - H3C S3100-52P Operation Manual

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
Jitter result:
RTT Number:100
Min Positive SD:1
Max Positive SD:6
Positive SD Number:38
Positive SD Sum:85
Positive SD average:2
Positive SD Square Sum:267
Min Negative SD:1
Max Negative SD:6
Negative SD Number:30
Negative SD Sum:64
Negative SD average:2
Negative SD Square Sum:200
SD lost packets number:0
Unknown result lost packet number:0
[Sysname-hwping-administrator-Jitter] display hwping history administrator
Jitter
HWPing entry(admin administrator, tag Jitter) history record:
Index
10
For detailed output description, see the corresponding command manual.

1.3.6 SNMP Test

I. Network requirements
Both the HWPing client and the SNMP Agent are H3C S3100-52P Ethernet switches.
Perform HWPing SNMP tests between the two switches to test the time required from
Response Status
1 274
2 278
3 280
4 279
5 280
6 270
7 275
8 263
9 270
275
Chapter 1 HWPing Configuration
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Min Positive DS:1
Max Positive DS:8
Positive DS Number:25
Positive DS Sum:42
Positive DS average:1
Positive DS Square Sum:162
Min Negative DS:1
Max Negative DS:8
Negative DS Number:24
Negative DS Sum: 41
Negative DS average:1
Negative DS Square Sum:161
DS lost packet number:0
LastRC
1 0 2000-04-02 08:14:58.2
1 0 2000-04-02 08:14:57.9
1 0 2000-04-02 08:14:57.6
1 0 2000-04-02 08:14:57.3
1 0 2000-04-02 08:14:57.1
1 0 2000-04-02 08:14:56.8
1 0 2000-04-02 08:14:56.5
1 0 2000-04-02 08:14:56.2
1 0 2000-04-02 08:14:56.0
1 0 2000-04-02 08:14:55.7
1-29
Time