Displaying And Maintaining Ssh Configuration; Comparison Of Ssh Commands With The Same Functions - H3C S3100-52P Operation Manual

Operation Manual – SSH
H3C S3100-52P Ethernet Switch

1.5 Displaying and Maintaining SSH Configuration

Display the public key part of the
current switch's key pairs
Display information about locally
saved public keys of SSH peers
Display SSH status and session
information
Display SSH user information
Display the current source IP
address or the IP address of the
source interface specified for the
SSH server.
Display the current source IP
address specified for the SSH Client.
Display the mappings between host
public keys and SSH servers saved
on a client

1.6 Comparison of SSH Commands with the Same Functions

After the SSH protocol supports the DSA asymmetric key algorithm, some SSH
configuration commands are changed. For the sake of SSH configuration compatibility,
the original commands are still supported.
and current commands.
Table 1-19 List of SSH configuration commands with the same functions
Operation
Display local RSA
public key(s)
Display information
about the peer RSA
public keys
Generate a RSA key
pair
Destroy a RSA key
pair
Enter public key view
To do...
Original commands
display rsa local-key-pair
public
display rsa
peer-public-key [ brief |
name keyname ]
rsa local-key-pair create
rsa local-key-pair destroy
rsa peer-public-key
keyname
1-26
Chapter 1 SSH Configuration
Use the command...
display public-key local { dsa
| rsa } public
display public-key peer
[ brief | name pubkey-name ]
display ssh server { session |
status }
display ssh user-information
[ username ]
display ssh-server source-ip
display ssh2 source-ip
display ssh server-info
Table 1-19 lists both the original commands
Current commands
display public-key local
rsa public
display public-key peer
[ brief | name
pubkey-name ]
public-key local create
rsa
public-key local destroy
rsa
public-key peer keyname
Remarks
Available
in any
view