Flash Memory Operations; Prompt Mode Configuration - H3C S3100-52P Operation Manual

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch
Caution:
For deleted files whose names are the same, only the latest deleted file is kept in the
recycle bin and can be restored.
The files which are deleted by the delete command without the /unreserved
keyword are actually moved to the recycle bin and thus still take storage space. You
can clear the recycle bin by using the reset recycle-bin command.
The dir /all command displays the files in the recycle bin in square brackets.
If the configuration files are deleted, the switch adopts the null configuration when it
starts up next time.

1.1.5 Flash Memory Operations

Perform the following Flash memory operations using commands listed in
Perform the following configuration in user view.
Table 1-4 Operations on the Flash memory
Format the Flash memory
Restore space on the Flash
memory
Caution:
The format operation leads to the loss of all files, including the configuration files, on the
Flash memory and is irretrievable.

1.1.6 Prompt Mode Configuration

You can set the prompt mode of the current file system to alert or quiet. In alert mode,
the file system will give a prompt for confirmation if you execute a command which may
cause data loss, for example, deleting or overwriting a file. In quiet mode, such prompt
will not be displayed.
To do...
Chapter 1 File System Management Configuration
Use the command...
format device
fixdisk device
1-4
Table 1-4.
Remarks
Required
Required