H3C S3100-52P Operation Manual page 69

Operation Manual – Login
H3C S3100-52P Ethernet switch
Configure to
authenticate users
locally or remotely
Configure the command
level available to users
logging in to the user
interface
Configure the supported
protocol
Make terminal services
available
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time for
the user interface
To do... Use the command...
authentication-mode
scheme [ command-
authorization ]
user privilege level
level
protocol inbound { all |
ssh | telnet }
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Chapter 3 Logging In Through Telnet
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
Users are authenticated
locally by default.
Optional
By default, commands of level
0 are available to users
logging in to the VTY user
interfaces.
Optional
Both Telnet protocol and SSH
protocol are supported by
default.
Optional
Terminal services are
available in all use interfaces
by default.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command to
disable the function to display
information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection to
a user interface is terminated
if no operation is performed in
the user interface within 10
minutes.
You can use the idle-timeout
0 command to disable the
timeout function.
3-10
Remarks