Operation Manual – Multicast
H3C S3100-52P Ethernet Switch
Enter VLAN interface view
Enable IGMP
Return to system view
Enter Ethernet port view
for the Layer 2 switch to
be configured
Define the port as a trunk
or hybrid port
Specify the VLANs to be
allowed to pass the
Ethernet port
Follow these steps to configure multicast VLAN on the Layer 2 switch:
Enter system view
Enable IGMP Snooping
Enter VLAN view
Enable IGMP Snooping
Enable multicast VLAN
Return to system view
Enter Ethernet port view
for the Layer 3 switch
Define the port as a trunk
or hybrid port
Specify the VLANs to be
allowed to pass the
Ethernet port
To do...
interface Vlan-interface
vlan-id
igmp enable
quit
interface interface-type
interface-number
port link-type { trunk |
hybrid }
port hybrid vlan
vlan-id-list { tagged |
untagged }
port trunk permit vlan
vlan-list
To do...
system-view
igmp-snooping enable
vlan vlan-id
igmp-snooping enable
service-type multicast
quit
interface interface-type
interface-number
port link-type { trunk |
hybrid }
port hybrid vlan vlan-list
{ tagged | untagged }
port trunk permit vlan
vlan-list
Chapter 3 IGMP Snooping Configuration
Use the command...
Use the command...
3-17
Remarks
—
Required
By default, the IGMP
feature is disabled.
—
—
Required
Required
The multicast VLAN
defined on the Layer 2
switch must be included,
and the port must be
configured to forward
tagged packets for the
multicast VLAN if the port
type is hybrid.
Remarks
—
—
—
Required
Required
—
—
Required
Required
The multicast VLAN must
be included, and the port
must be configured to
forward tagged packets
for the multicast VLAN if
the port type is hybrid.