H3C S3100-52P Operation Manual page 748

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
V. Disconnecting a specified user
On the FTP server, you can disconnect a specified user from the FTP server to secure
the network.
Follow these steps to disconnect a specified user:
Enter system view
On the FTP server,
disconnect a specified
user from the FTP server
Note:
With an H3C S3100-52P Ethernet switch acting as the FTP server, if a network
administrator attempts to disconnect a user that is uploading/downloading data to/from
the FTP server the S3100-52P Ethernet switch will disconnect the user after the data
transmission is completed.
VI. Configuring the banner for an FTP server
Displaying a banner: With a banner configured on the FTP server, when you access the
FTP server through FTP, the configured banner is displayed on the FTP client. Banner
falls into the following two types:
Login banner: After the connection between an FTP client and an FTP server is
established, the FTP server outputs the configured login banner to the FTP client
terminal.
Figure 1-2 Process of displaying a login banner
Shell banner: After the connection between an FTP client and an FTP server is
established and correct user name and password are provided, the FTP server
outputs the configured shell banner to the FTP client terminal.
To do...
system-view
ftp disconnect
user-name
Chapter 1 FTP and SFTP Configuration
Use the command...
1-6
Remarks
—
Required