Operation Manual – 802.1x and System Guard
H3C S3100-52P Ethernet switch
Enable HABP
Configure the current
switch to be an HABP
server
Configure the interval to
send HABP request
packets.
3.3 HABP Client Configuration
HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Follow these steps to configure an HABP client:
Enter system view
Enable HABP
3.4 Displaying and Maintaining HABP Configuration
Display HABP
configuration and status
Display the MAC address
table maintained by HABP
To do...
habp enable
habp server vlan vlan-id
habp timer interval
To do...
system-view
habp enable
To do...
display habp
display habp table
Use the command...
Use the command...
Use the command...
3-2
Chapter 3 HABP Configuration
Remarks
Optional
By default, HABP is
enabled.
Required
By default, a switch
operates as an HABP
client after you enable
HABP on the switch. If you
want to use the switch as
a management switch,
you need to configure the
switch to be an HABP
server.
Optional
The default interval for an
HABP server to send
HABP request packets is
20 seconds.
Remarks
—
Optional
HABP is enabled by
default. And a switch
operates as an HABP
client after you enable
HABP for it.
Remarks
Available in any view
Available in any view