Configuring Quick Ead Deployment; Configuration Prerequisites; Configuration Procedure - H3C S3100-52P Operation Manual

Operation Manual – 802.1x and System Guard
H3C S3100-52P Ethernet switch
Note:
The quick EAD deployment feature takes effect only when the access control mode of
an 802.1x-enabled port is set to auto.

2.2 Configuring Quick EAD Deployment

2.2.1 Configuration Prerequisites

Enable 802.1x on the switch.
Set the access mode to auto for 802.1x-enabled ports.

2.2.2 Configuration Procedure

I. Configuring a free IP range
A free IP range is an IP range that users can access before passing 802.1x
authentication.
Follow these steps to configure a free IP range:
Enter system view
Configure the URL for
HTTP redirection
Configure a free IP
range
To do...
system-view
dot1x url url-string
dot1x free-ip ip-address
{ mask-address |
mask-length }
Chapter 2 Quick EAD Deployment Configuration
Use the command...
2-2
Remarks
—
Required
Required
By default, no free IP
range is configured.