Setting The Port Security Mode - H3C S3100-52P Operation Manual

Operation Manual – Port Security-Port Binding
H3C S3100-52P Ethernet Switch
Follow these steps to set the maximum number of MAC addresses allowed on a port:
Enter system view
Enter Ethernet port view
Set the maximum number
of MAC addresses
allowed on the port

1.2.3 Setting the Port Security Mode

Follow these steps to set the port security mode:
Enter system view
Set the OUI value for user
authentication
Enter Ethernet port view
Set the port security mode
To do...
system-view
interface interface-type
interface-number
port-security
max-mac-count
count-value
To do...
system-view
port-security oui
OUI-value index
index-value
interface interface-type
interface-number
port-security port-mode
{ autolearn |
mac-and-userlogin-sec
ure |
mac-and-userlogin-sec
ure-ext |
mac-authentication |
mac-else-userlogin-sec
ure |
mac-else-userlogin-sec
ure-ext | secure |
userlogin |
userlogin-secure |
userlogin-secure-ext |
userlogin-secure-or-ma
c |
userlogin-secure-or-ma
c-ext |
userlogin-withoui }
Chapter 1 Port Security Configuration
Use the command...
Use the command...
1-7
Remarks
—
—
Required
Not limited by default
Remarks
—
Optional
In userLoginWithOUI
mode, a port supports one
802.1x user plus one user
whose source MAC
address has a specified
OUI value.
—
Required
By default, a port operates
in noRestriction mode. In
this mode, access to the
port is not restricted.
You can set a port
security mode as needed.