H3C S3100-52P Operation Manual page 871

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the automatic
test interval
Configure the probe
timeout time
Configure the maximum
number of history records
that can be saved
Configure the type of
service
Start the test
Display test results
8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
To do...
source-ip ip-address
source-port port-number
count times
frequency interval
timeout time
history-records number
tos value
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
Use the command...
Use the command...
1-15
Chapter 1 HWPing Configuration
Remarks
Optional
By default, the source IP
address is not specified.
Optional
By default, no source port
is specified.
Optional
By default, one probe is
made per time.
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Optional
By default, a probe times
out in three seconds.
Optional
By default, the maximum
number is 50.
Optional
By default, the service
type is zero.
Required
Required
The display command
can be executed in any
view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.