H3C S3100-52P Operation Manual page 923

Operation Manual – IPv6 Management
H3C S3100-52P Ethernet Switch
service and TFTP service to the switch respectively. It is required that you telnet to the
telnet server from SWA and download files from the TFTP server.
II. Network diagram
3003::1/64
3003::2/64
Figure 2-3 Network diagram for IPv6 applications
III. Configuration procedure
Note:
You need configure IPv6 address at the switch's and server's interfaces and ensure
that the route between the switch and the server is accessible before the following
configuration.
# Ping SWB's IPv6 address from SWA.
<SWA> ping ipv6 3003::1
PING 3003::1 : 64
Reply from 3003::1
bytes=56 Sequence=1 hop limit=64
Reply from 3003::1
bytes=56 Sequence=2 hop limit=64
Reply from 3003::1
bytes=56 Sequence=3 hop limit=64
Reply from 3003::1
bytes=56 Sequence=4 hop limit=64
Reply from 3003::1
bytes=56 Sequence=5 hop limit=64
--- 3003::1 ping statistics ---
Telnet_Server TFTP_Server
3001::2/64
3002::1/64
3002::2/64
SWB
SWA
data bytes, press CTRL_C to break
Chapter 2 IPv6 Application Configuration
3001::3/64
3001::4/64
SWC
time = 110 ms
time = 31 ms
time = 31 ms
time = 31 ms
time = 31 ms
2-5