H3C S3100-52P Operation Manual page 749

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
Figure 1-3 Process of displaying a shell banner
Follow these steps to configure the banner display for an FTP server:
Enter system view
Configure a login banner
Configure a shell banner
Note:
For details about the header command, refer to the Login part of the manual.
VII. Displaying FTP server information
Display the information about FTP
server configurations on a switch
Display the source IP address set for
an FTP server
Display the login FTP client on an FTP
server
To do... Use the command...
system-view
header login text
header shell text
To do...
Chapter 1 FTP and SFTP Configuration
—
Required
Use either command or both.
By default, no banner is
configured.
Use the command...
display ftp-server
display ftp-server
source-ip
display ftp-user
1-7
Remarks
Remarks
Available in
any view