H3C S3100-52P Operation Manual page 719

Operation Manual – SSH
H3C S3100-52P Ethernet Switch
Note:
Before performing the following steps, you must generate an RSA public key pair
(using the client software) on the client, save the key pair in a file named public, and
then upload the file to the SSH server through FTP or TFTP. For details, refer to
Configuring the SSH Client.
# Import the client's public key named Switch001 from file public.
[Switch] public-key peer Switch001 import sshkey public
# Assign the public key Switch001 to client client001.
[Switch] ssh user client001 assign publickey Switch001
Configure the SSH client (taking PuTTY version 0.58 as an example)
# Generate an RSA key pair.
1) Run PuTTYGen.exe, choose SSH2(RSA) and click Generate.
Figure 1-22 Generate a client key pair (1)
1-40
Chapter 1 SSH Configuration