H3C S3100-52P Operation Manual page 649

Operation Manual – SNMP-RMON
H3C S3100-52P Ethernet switch
Follow these steps to configure RMON:
To do...
Enter system
view
Add an event
entry
Add an alarm
entry
Add an
extended alarm
entry
Enter Ethernet
port view
Add a history
entry
Add a statistics
entry
Note:
The rmon alarm and rmon prialarm commands take effect on existing nodes only.
For each port, only one RMON statistics entry can be created. That is, if an RMON
statistics entry is already created for a given port, you will fail to create another
statistics entry with a different index for the same port.
Use the command...
system-view
rmon event event-entry
[ description string ] { log | trap
trap-community | log-trap
log-trapcommunity | none } [ owner
text ]
rmon alarm entry-number
alarm-variable sampling-time { delta
| absolute } rising_threshold
threshold-value1 event-entry1
falling_threshold threshold-value2
event-entry2 [ owner text ]
rmon prialarm entry-number
prialarm-formula prialarm-des
sampling-timer { delta | absolute |
changeratio } rising_threshold
threshold-value1 event-entry1
falling_threshold threshold-value2
event-entry2 entrytype { forever |
cycle cycle-period } [ owner text ]
interface interface-type
interface-number
rmon history entry-number
buckets number interval
sampling-interval [ owner text ]
rmon statistics entry-number
[ owner text ]
2-4
Chapter 2 RMON Configuration
Remarks
—
Optional
Optional
Before adding an alarm
entry, you need to use the
rmon event command to
define the event to be
referenced by the alarm
entry.
Optional
Before adding an
extended alarm entry, you
need to use the rmon
event command to define
the event to be referenced
by the extended alarm
entry.
—
Optional
Optional