Jitter Test - H3C S3100-52P Operation Manual

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
TCP Connect Max Time: 20
TCP Connect Timeout Times: 0
[Sysname-hwping-administrator-http] display hwping history administrator
http
HWPing entry(admin administrator, tag http) history record:
Index
10
For detailed output description, see the corresponding command manual.
Note:
For an HTTP test, if configuring the destination address as the host name, you must
configure the IP address of the DNS server to resolve the host name into an IP address,
which is the destination IP address of this HTTP test.

1.3.5 Jitter Test

I. Network requirements
Both the HWPing client and the HWPing server are H3C S3100-52P Ethernet switches.
Perform a HWPing jitter test between the two switches to test the delay jitter of the UDP
packets exchanged between this end (HWPing client) and the specified destination end
(HWPing server).
II. Network diagram
Figure 1-6 Network diagram for the Jitter test
Response Status
1 13
2 9
3 3
4 3
5 3
6 2
7 3
8 3
9 2
2
Chapter 1 HWPing Configuration
LastRC
1 0 2000-04-02 15:15:52.5
1 0 2000-04-02 15:15:52.5
1 0 2000-04-02 15:15:52.5
1 0 2000-04-02 15:15:52.5
1 0 2000-04-02 15:15:52.5
1 0 2000-04-02 15:15:52.4
1 0 2000-04-02 15:15:52.4
1 0 2000-04-02 15:15:52.4
1 0 2000-04-02 15:15:52.4
1 0 2000-04-02 15:15:52.4
1-27
Time