Qos Supported By S3100-52P Ethernet Switch - H3C S3100-52P Operation Manual

Operation Manual – QoS-QoS Profile
H3C S3100-52P Ethernet Switch

1.2 QoS Supported By S3100-52P Ethernet Switch

The S3100-52P Ethernet Switch supports the QoS features listed in
Table 1-1 QoS features supported by S3100-52P Ethernet Switch
QoS Feature
Traffic
classification
QoS action
Congestion
avoidance
Description
Classify incoming traffic
based on ACLs. The
S3100-52P supports the
following types of ACLs:
Basic ACLs
Advanced ACLs
Layer-2 ACLs
User-defined ACLs
The S3100-52P supports
performing the following
QoS actions for packets
matching the specified
ACL:
Priority marking
Traffic policing
Traffic redirecting
VLAN Mapping
Traffic accounting
Traffic mirroring
You can configure the
following QoS actions as
required on the
S3100-52P:
Priority trust mode
Protocol packet priority
Line rate
Burst
WRED
1-4
Chapter 1 QoS Configuration
Table
Refer to ...
For information about ACLs, refer
to the ACL Operation and ACL
Command manuals.
For information
classification, refer
Classification.
For information
marking, refer to Priority
For information
policing, refer to Traffic
For information
redirecting, refer
Redirecting.
For information
Mapping, refer to VLAN
For information
accounting, refer to
Traffic Accounting.
For information
mirroring, refer to Traffic
For information about priority trust
mode, refer to Priority Trust
For information about specifying
priority for protocol packets, refer
to Protocol Priority.
For information about line rate,
refer toLine Rate.
For information about the burst
function, refer to Burst.
For information about congestion
avoidance and WRED, refer to
Congestion Avoidance.
1-1:
about traffic
to Traffic
about priority
Marking.
about traffic
Policing.
about traffic
to Traffic
about VLAN
Mapping.
about traffic
Flow-based
about traffic
mirroring.
Mode.