H3C S3100-52P Operation Manual page 762

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
Upload a local file to the
remote SFTP server
Rename a file on the
remote server
Exit SFTP client view and
return to system view
Display the online help
about a specified
command concerning
SFTP
Note:
If you specify to authenticate a client through public key on the server, the client needs
to read the local private key when logging in to the SFTP server. Since both RSA and
DSA are available for public key authentication, you need to use the identity-key key
word to specify the algorithms to get correct local private key; otherwise you will fail to
log in. For details, see SSH Operation Manual.
II. Specifying the source interface or source IP address for an SFTP client
You can specify the source interface or source IP address for a switch acting as an FTP
client, so that it can connect to a remote SFTP server.
Follow these steps to specify the source interface or source IP address for an SFTP
client:
Enter system view
Specify an interface as the
source interface of the
specified SFTP client
Specify an IP address as
the source IP address of
the specified SFTP client
Display the source IP
address used by the
current SFTP client
To do...
put localfile [ remotefile ]
rename remote-source
remote-dest
bye
exit
quit
help [ all |
command-name ]
To do...
system-view
sftp source-interface
interface-type
interface-number
sftp source-ip ip-address
display sftp source-ip
Chapter 1 FTP and SFTP Configuration
Use the command...
Use the command...
1-20
Remarks
The three commands
have the same effect.
Optional
Remarks
—
Use either command
Not specified by default.
Optional
Available in any view